Description

The modern classics tribute to the legendary yacht designer Doug Peterson, fully licensed for serial production by "Doug Peterson’s Trust". Inspired by the 1976 ¼ tonner design, and after many years of racing on the “Peterson25” class in Black Sea, one of the owners of Odessos Rigging, Kalin Georgiev, decided to re-produce this beauty with modern and the best available materials! The result is absolutely light, stiff and fast boat which hull #1 is winning constantly Romanian regattas with her first owner!

Specifications

Construction

DESIGN & ENGINEERING:
Structural Engineering: Odessos Rigging Ltd.
ISO 12217-1 Category C

Ballast: 570 kg



STRUCTURE
Hull, Deck, Interior Grid - Gelcoat Surface
E-glass multiaxial and uni-directional
Foam core hand laid vinyl-ester resin

KEEL AND RUDDER
Cast iron keel
Race faired
E-glass foam blade racing faired
Jeffa self-aligning rudder bearings top and bottom
E-glass tiller with adjustable tiller extension

INTERIOR & FIT OUT
4 x Gelcoat structural bulkheads
4 x Storage / seat modules amidships
1 x chemical WC

PRICE, TERMS & CONDITIONS
BASE PRICE: € 35,000

OPTIONS:
- Tuff Luff Headstay system
- 1x19 Compacted Wire /Dyform/ Standing Rigging- 30% less stretch
- Custom spliced and striped Halyards and sheets
OPTIONS PACKAGE PRICE: € 1500

Equipment

RUNNING RIGGING
1 x Main halyard, 8 mm Dyneema SK78
1 x Genoa halyard standard, 8 mm Dyneema SK78
1 x Spinnaker halyard standard, 8 mm Dyneema SK78
1 x Spear halyard (Genoa/Spinnaker), 8 mm Dyneema SK78
1 x Mainsheet, 8 mm Dyneema SK78
2 x Genoa sheets, 8 mm Dyneema SK78
2 x Spinnaker sheets, 8 mm Dyneema SK78
2 x Traveler cross-haul 4:1 lead forward to main trimmer
2 x Jib pin stop cars
1 x Cunningham 4:1 lead to cabin top

DECK GEAR BY ANTAL AND RONSTAN
Winches:
Primary 2 x W 30 / 2 speed
Pit 2 x W 16 / 2 speed

Genoa Traveler tracks: 2 x ball bearing RC 11930
Jib Traveler tracks: 2 x pin stop RC 51930
Main Traveler track: 1 x ball bearing RC 11921
2 double rope clutches ANTAL V-cam 814 (main,
jib and spinnaker halyards)
Stainless steel stanchions and & pulpits
Life lines s/s 1 x 19 wire

DECK HARDWARE
Stainless Steel chain plates
Removable plexiglass hatch
Compass 80 mm – in cockpit face

MAST, BOOM STANDING & RUNNING RIGGING
MAST
JOHN MAST fractional tapered at 7/8, mast section 116E
2 sets spreaders at zero degrees swept
1:1 Main halyard
Provision for 2 jib halyards – 1 halyard standard
Provision for 2 spinnaker halyards – 1 halyard standard

BOOM
JOHN MAST aluminum, boom section 110BF 8:1 outhaul lead to cabin top
Provision for single reef w/ Clutch on a cabin top (second reef optional)

SPINNAKER POLE
JOHN MAST aluminum, 40 mm
1 x Boom Vang 12:1 lead aft to centerline of pit
1 x Outhaul, 8:1 lead to cabin top
1 x Spinnaker pole topping lift, 7 mm Dyneema SK78
1 x Spinnaker pole down 2:1, 7 mm Dyneema SK78

Sails & Spars

SAIL PLAN
Genoa (Overlapping 150%): 17.14 m2
Mainsail: 18.11 m2
Spinnaker: 39.00 m2
Sail Area Upwind: 35.25 m2
Sail Area Downwind: 57.11 m2
I: 8.22 m
J:.64 m
P: 9.20 m
E: 3.30 m
TPS: 2.65 m

Electrics

ELECTRICAL
1 x Battery switch
1 x Switch panel with four circuit breakers
2 x L.E.D. interior lights
1 x USB charger outlet
1 x Navigation lights
Compass light

Disclaimer

The particulars and specifications are supplied by the vendor and not SeaBoats. Such information has not been verified and may be incorrect. Please do not rely on particulars and specifications unless you have verified their accuracy.

Location Map